Microwave Motion Sensor Module is developed applying Doppler Radar principle.
If the movement of the object is detected by the microwave motion sensor, the reflected microwave frequency is shifted away from the transmit frequency to receiving antenna(Pin).
The reflected and shifted microwave frequency is mixed with the transmit microwave frequency and results a low frequency voltage at the output of the sensor.
The Microwave Motion Sensor Module is CW RADAR, ISM BAND.
C-Band Microwave Seneor Module (200L)
Features
Used a RF the Microwave Sensor.
Appling the Doppler radar Principle.
CW Radar, ISM Band
Small size.
Used Pin Antenna & Amplifier Inclusion.
Microwave technology.
Low cost & Low Power Consumption.
Specification
Classification
Mode
Electrical Characteristics
Operating Voltage
4.7 ~ 5.3 VDC
Operating Current
10~20mA
Center Frequency
5.800GHz (5.75GHz ~ 5.85GHz)
Output Power
< 10mL
Absolute Maximum Ratings
DC Input Voltage
5VDC (4.7 ~ 5.3 VDC)
Operating Temperature Range
-30 to 50°C
Storage Temperature Range
-40 to 80°C
Relative Humidity
95% at 35°C
General Contents
Size
82mm x 24mm x 8.5mm (Pin Ant.:exclusion)
Detection Range & Angle (Wall)(Ceiling)
15 ~ 20m (Max.) / 130° ~ 150°
10~15m Dia(Max.) / 360°
Radiated MW Energy
10~30 micro Watt (atleast)
Model No.
Classification
Model No.
Frequency
Remark
C-Band
Microwave Motion
Sensor Modules
DNS-200L
5.800GHz
Pin
Antenna Type
Amplifier Inclusion
Antenna Beam Pattern (Omni-Directional)
[Summary of Microwave Motion Sensor Module]
Microwave Motion Sensor Module is developed applying Doppler Radar principle.
If the movement of the object is detected by the microwave motion sensor, the reflected microwave frequency is shifted away from the transmit frequency to receiving antenna(Pin).
The reflected and shifted microwave frequency is mixed with the transmit microwave frequency and results a low frequency voltage at the output of the sensor.
The Microwave Motion Sensor Module is CW RADAR, ISM BAND.